
Crossfire II 3-9x40
V-Brite | 1-Inch Tube


Select a product to compare with the product you are currently viewing.

Crossfire II 3-9x40 Riflescope
With long eye relief, a fast-focus eyepiece, fully multi-coated lenses and resettable MOA turrets, there's no compromising on the Crossfire II. Clear, tough and bright, this riflescope hands other value-priced riflescopes their hat. The hard anodized single-piece aircraft-grade aluminum tube is nitrogen purged and o-ring sealed for waterproof/fogproof performance.
Dual use for Shooting Tactical / Hunting



Magnification | 3-9 x |
Objective Lens Diameter | 40 mm |
Eye Relief | 3.8 inches |
Field of View | 34.1-12.6 feet/100 yards |
Tube Size | 1 inch |
Turret Style | Capped |
Adjustment Graduation | 1/4 MOA |
Travel per Rotation | 15 MOA |
Max Elevation Adjustment | 60 MOA |
Max Windage Adjustment | 60 MOA |
Length | 12 inches |
Weight | 16.2 ounces |
Product Manual (PDF) | Download |
Optical Features | |
Fully Multi-Coated | Increases light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. |
Second Focal Plane Reticle | Scale of reticle maintains the same ideally-sized appearance. Listed reticle subtensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification. |
Illuminated Center Dot | Provides a precise aiming point under low-light conditions. |
Construction Features | |
Tube Size | 1-inch diameter. |
Single-Piece Tube | Maximizes alignment for improved accuracy and optimum visual performance, as well as ensures strength and waterproofness. |
Aircraft-Grade Aluminum | Constructed from a solid block of aircraft-grade aluminum for strength and rigidity. |
Waterproof | O-ring seals prevent moisture, dust and debris from penetrating the riflescope for reliable performance in all environments. |
Fogproof | Nitrogen gas purging prevents internal fogging over a wide range of temperatures. |
Shockproof | Rugged construction withstands recoil and impact. |
Hard Anodized Finish | Highly durable low-glare matte finish helps camouflage the shooter's position. |
Capped Reset Turrets | Allow re-indexing of the turret to zero after sighting in the riflescope. Caps provide external protection for turret. |
Convenience Features | |
Fast Focus Eyepiece | Allows quick and easy reticle focusing. |
Magnification | 3-9 x |
Objective Lens Diameter | 40 mm |
Eye Relief | 3.8 inches |
Field of View | 34.1-12.6 feet/100 yards |
Tube Size | 1 inch |
Turret Style | Capped |
Adjustment Graduation | 1/4 MOA |
Travel per Rotation | 15 MOA |
Max Elevation Adjustment | 60 MOA |
Max Windage Adjustment | 60 MOA |
Length | 12 inches |
Weight | 16.2 ounces |
Product Manual (PDF) | Download |
Crossfire II 3-9x40 Dimensions

Lengths | |||||
L1 | L2 | L3 | L4 | L5 | L6 |
12.0 | 2.1 | 1.8 | 5.0 | 3.4 | 3.6 |
Heights | |
H1 | H2 |
1.84 | 1.71 |
Dimensions measured in inches.

V-Brite Illuminated Reticle (MOA)
Uses the V-Plex format along with battery-powered electronics to illuminate the center dot for better low-light performance. Good for hunters/shooters during extra-low light conditions.
Subtension detail for the Crossfire 3-9x40 with V-Brite Illuminated Reticle. >
i am looking to get a vortex crossfire II 3-9x40 to mount on my savage 93R17 GV, 17 hmr, and i was wondering what height rings i will need to use to mount it to the gun rails that come on the gun. please help.
The Savage 220 has holes drilled for scope mounts that are quite wide apart from each other. I’d like to use a Diamondback 3-9x40. If I come straight up, I’m on the bells vs the tube of the scope tho. Extension rings needed? I don’t want a 1 piece mount
I would like to purchase a Crossfire II or Diamondback scope for my Savage 220. I prefer to use a two piece scope mount vs. a cantilever or picatinny rail. What's going to work? Will I need extension rings, etc.?
I have a m&p 15-22 and am looking at getting the crossfire 3x9 for it. What height scope rings would I need in order to be able to keep my flip up iron sight on? I don't want to have to take flip up sight on and off if I dont have to.
What type of battery does the Crossfire II V-brite scope take? and where can i get replacements? Also how difficult is it to replace the battery?
I purchased the Crossfire II 3x9x40 for my AR 15. I also purchased the 1" Vortex high mount hunter rifle scope rings. Will these be high enough or do I have to use one of the cantilever mounts?
Just bought a crossfire II. In the package there is a clear reticle "decal" / sticker. What is the purpose of this? Nothing mentioned in manual.
I have never bought a scope before and I want to mount this to a Rem 1187 cantilever barrel. How do i know what rings I need?
Pro 1-Inch Rings
High Height
Mounts 1.03 inches (26.16 mm) from base to center. Sold two per package.
MSRP: $79.99
Buy Now: $54.99Pro 1-Inch Rings
Medium Height
Mounts 0.88 inches (22.35 mm) from base to center. Sold two per package.
MSRP: $79.99
Buy Now: $54.99Flip Cap Optic Cover
Size 5
For optics with an outside diameter of 1.6 to 1.8 inches.
MSRP: $12.99
Buy Now: $8.99Flip Cap Optic Cover
Size 6
For optics with an outside diameter of 1.8 to 2.2 inches.
MSRP: $12.99
Buy Now: $8.99Pro 1-Inch Rings
Low Height
Mounts 0.78 inches (19.81 mm) from base to center. Sold two per package.
MSRP: $79.99
Buy Now: $54.99Bubble Level
Vertically align the reticle crosshair on a 1-inch riflescope tube.
MSRP: $49.99
Buy Now: $34.99Hunter 1-Inch Rings
High Height
Mounts 1.22 inches (31mm) from base to center. Set of two rings.
MSRP: $24.99
Buy Now: $19.99Hunter 1-Inch Rings
Medium Height
Mounts 0.87 inches (22mm) from base to center. Set of two rings.
MSRP: $24.99
Buy Now: $19.99Sure Fit Riflescope Covers
Protective riflescope cover fits scopes measuring 12 to 14 inches.
MSRP: $29.99
Buy Now: $19.99Hunter 1-Inch Rings
Low Height
Mounts 0.63 inches (16mm) from base to center. Set of two rings.
MSRP: $24.99
Buy Now: $19.99Torque Wrench Mounting Kit
Tighten to the specified torque and not a bit more.
MSRP: $89.99
Buy Now: $69.99