
Crossfire II 3-9x50
V-Brite | 1-Inch Tube


Select a product to compare with the product you are currently viewing.

Crossfire II 3-9x50 Riflescope
With long eye relief, a fast-focus eyepiece, fully multi-coated lenses and resettable MOA turrets, there's no compromising on the Crossfire II. Clear, tough and bright, this riflescope hands other value-priced riflescopes their hat. The hard anodized single-piece aircraft-grade aluminum tube is nitrogen purged and o-ring sealed for waterproof/fogproof performance.
Dual use for Shooting Tactical / Hunting



Magnification | 3-9 x |
Objective Lens Diameter | 50 mm |
Eye Relief | 3.8 inches |
Field of View | 32-12.9 feet/100 yards |
Tube Size | 1 inch |
Turret Style | Capped |
Adjustment Graduation | 1/4 MOA |
Travel per Rotation | 15 MOA |
Max Elevation Adjustment | 60 MOA |
Max Windage Adjustment | 60 MOA |
Parallax Setting | 100 yards |
Length | 12.7 inches |
Weight | 18.6 ounces |
Product Manual (PDF) | Download |
Optical Features | |
Fully Multi-Coated | Increases light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. |
Second Focal Plane Reticle | Scale of reticle maintains the same ideally-sized appearance. Listed reticle subtensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification. |
Illuminated Center Dot | Provides a precise aiming point under low-light conditions. |
Construction Features | |
Tube Size | 1-inch diameter. |
Single-Piece Tube | Maximizes alignment for improved accuracy and optimum visual performance, as well as ensures strength and waterproofness. |
Aircraft-Grade Aluminum | Constructed from a solid block of aircraft-grade aluminum for strength and rigidity. |
Waterproof | O-ring seals prevent moisture, dust and debris from penetrating the riflescope for reliable performance in all environments. |
Fogproof | Nitrogen gas purging prevents internal fogging over a wide range of temperatures. |
Shockproof | Rugged construction withstands recoil and impact. |
Hard Anodized Finish | Highly durable low-glare matte finish helps camouflage the shooter's position. |
Capped Reset Turrets | Allow re-indexing of the turret to zero after sighting in the riflescope. Caps provide external protection for turret. |
Convenience Features | |
Fast Focus Eyepiece | Allows quick and easy reticle focusing. |
Magnification | 3-9 x |
Objective Lens Diameter | 50 mm |
Eye Relief | 3.8 inches |
Field of View | 32-12.9 feet/100 yards |
Tube Size | 1 inch |
Turret Style | Capped |
Adjustment Graduation | 1/4 MOA |
Travel per Rotation | 15 MOA |
Max Elevation Adjustment | 60 MOA |
Max Windage Adjustment | 60 MOA |
Parallax Setting | 100 yards |
Length | 12.7 inches |
Weight | 18.6 ounces |
Product Manual (PDF) | Download |
Crossfire II 3-9x50 Dimensions

Lengths | |||||
L1 | L2 | L3 | L4 | L5 | L6 |
12.7 | 2.1 | 1.8 | 5.1 | 4.0 | 3.6 |
Heights | |
H1 | H2 |
2.24 | 1.71 |
Dimensions measured in inches.

V-Brite Illuminated Reticle (MOA)
Uses the V-Plex format along with battery-powered electronics to illuminate the center dot for better low-light performance. Good for hunters/shooters during extra-low light conditions.
Subtension detail for the Crossfire 3-9x50 with V-Brite Illuminated Reticle. >
will the scope work on a styer pro hunter 308 and 270 with the high rings
What mount would I use to mount this to a windham 223/5.56mm? Looking to reach out a little ways if needed for coyotes.
What is the thread pitch on the Vortex Crossfire ii 3x9-50 vplex optic?
Will the crossfire 2 hold up against the thump of a .450 bushmaster in a bolt action platform?
Will the Crossfire II take the beating if mounted on a shot gun?
Just got a Winchester XPR .270. What scope do you all recommend, will be shooting 100 to 200 yards. Have a budget of +/- 0.
Is there a sun shade available for this model?
What mount height do I need for the optic on a Tikka T3 Forest?
Pro 1-Inch Rings
High Height
Mounts 1.03 inches (26.16 mm) from base to center. Sold two per package.
MSRP: $79.99
Buy Now: $54.99Pro 1-Inch Rings
Medium Height
Mounts 0.88 inches (22.35 mm) from base to center. Sold two per package.
MSRP: $79.99
Buy Now: $54.99Flip Cap Optic Cover
Size 7
For optics with an outside diameter of 2.2 to 2.4 inches.
MSRP: $12.99
Buy Now: $8.99Pro 1-Inch Rings
Low Height
Mounts 0.78 inches (19.81 mm) from base to center. Sold two per package.
MSRP: $79.99
Buy Now: $54.99Flip Cap Optic Cover
Size 5
For optics with an outside diameter of 1.6 to 1.8 inches.
MSRP: $12.99
Buy Now: $8.99Hunter 1-Inch Rings
High Height
Mounts 1.22 inches (31mm) from base to center. Set of two rings.
MSRP: $24.99
Buy Now: $19.99Bubble Level
Vertically align the reticle crosshair on a 1-inch riflescope tube.
MSRP: $49.99
Buy Now: $34.99Hunter 1-Inch Rings
Medium Height
Mounts 0.87 inches (22mm) from base to center. Set of two rings.
MSRP: $24.99
Buy Now: $19.99Hunter 1-Inch Rings
Low Height
Mounts 0.63 inches (16mm) from base to center. Set of two rings.
MSRP: $24.99
Buy Now: $19.99Sure Fit Riflescope Covers
Protective riflescope cover fits scopes measuring 12 to 14 inches.
MSRP: $29.99
Buy Now: $19.99Torque Wrench Mounting Kit
Tighten to the specified torque and not a bit more.
MSRP: $89.99
Buy Now: $69.99