Banner
Title

Bubble Level

1-Inch Riflescope Tube

Bubble Level Click to Enlarge
SKU: BL1
Alt Views
Thumbnail
MSRP: $49.99
*Prices in US Dollars
Reviews:
Bubble Level is rated 5.0 out of 5 by 2.
  • y_2018, m_6, d_23, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_BL1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 25.81ms
  • REVIEWS, PRODUCT
Select a Model

Riflescope Bubble Level for 1-Inch Riflescope Tube

For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

Mounts quickly and easily to the riflescope tube.



VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Rated 5 out of 5 by from These work good I have three of these, two on PSTs and one on a Gen2 Razor. All three of them have held level on the scope, never needing re-adjusted. I'd say a necessity for shooting at extended ranges.
Date published: 2017-06-15
Rated 5 out of 5 by from Works great Does it’s job well and is durable. Have had it for about 2 years and put through heck. Held up well still works as is it should.
Date published: 2018-03-29
  • y_2018, m_6, d_23, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_BL1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 16.6ms
  • REVIEWS, PRODUCT

What is the torque in the screws?

Asked by: Everett
We recommend 10-12 inch/lbs for the bubble levels. There is not a lot of pressure required, you simply have to tighten it to make sure the level stays in place.
Answered by: Graham at Vortex Optics
Date published: 2018-06-11

Do you have to remove the scope from it's mounts to install the bubble level?

Asked by: Baton Rouge, LA
You might be able to, however, it depends on your setup.
Answered by: Josh at Vortex Optics
Date published: 2018-04-30

Does this accessory help with leveling the scope when mounting it on the rifle ?

Asked by: Moltzy
The bubble level is designed to keep the rifle level when shooting, it is not designed to be used when mounting the scope.
Answered by: Mike at Vortex Optics
Date published: 2018-02-15

What type of screws attach the rings I lost one and need to replace it real quick.

Asked by: Josseph
The screws are 8-32x3/8, if you would like to give us a call at 800-426-0048 ext 6 we can get you a replacement.
Answered by: Mike at Vortex Optics
Date published: 2018-02-07

DO you sell replacement bubble vials? Mine broke.

Asked by: Nate
Give us a call at 800-426-0048 ext 6, we can get that replaced for you.
Answered by: Mike at Vortex Optics
Date published: 2018-01-19

Do you have a recommended torque setting for mounting this bubble level to the scope tube?

Asked by: Greg1230
12 inch pounds with no Loctite will work very well.
Answered by: Mike at Vortex Optics
Date published: 2018-05-29

Where is the proper placement for the device: before or after the elevation/windage knobs ? My scope is mounted on a Burris P.E.P.R. mount. Not much room on in front of knobs. If behind knobs is wrong what can I do to correct?

Asked by: Chuck
Location for your bubble level is a matter of personal preference, I prefer mine between the turrets and the objective end of the scope because it allows me to see my turrets better but if you do not have room there you can put it between the turrets and the eyepiece.
Answered by: Mike at Vortex Optics
Date published: 2018-05-18
  • y_2018, m_6, d_24, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_BL1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 25.71ms
  • QUESTIONS, PRODUCT
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 19.18ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;