Banner
Title

Hunter 1-Inch Rings

Low Height [0.63 Inches | 16.0 mm]

Two per Package

Hunter 1-Inch Rings Click to Enlarge
SKU: RING-L
Alt Views
Thumbnail
MSRP: $24.99
*Prices in US Dollars
Reviews:
Hunter 1-Inch Rings is rated 4.4 out of 5 by 9.
  • y_2018, m_8, d_15, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_RING-L, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 68.91ms
  • REVIEWS, PRODUCT

Select a Model

Hunter 1-Inch Riflescope Rings — Low Height [0.63 Inches | 16.0 mm]

Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
Made from aircraft-grade 6061-T6 aluminum for optimum strength.


Note
These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.63 inches (16.0 mm) from the base.
Sold two rings per package.
We do not recommend the Hunter Rings for use on heavy recoiling rifles.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Clamp Thumb Screws Ring Screws
25–30 in/lbs 15 in/lbs
Rated 5 out of 5 by from Amazing Scope Rings Note: A friendly heads up on the measurement. Vortex medium is like a set of high rings... their high rings is like a set of extra-high rings. I purchased the medium rings and mounted a 44mm adjustable objective Vortex scope on them with 2mm of room left, 4mm without an adjustable objective. These Hunter scope rings are amazing... I don't know how they manufacture them for the retail price of less than dollars. They don't need lapping, at least mine didn't. They are well made and extremely well balanced. They are relatively light weight and easy to mount. They seem to be durable and the fitment was fantastic. Unless I am placing rings on a 50 BMG these will definitely be my to go rings from now on. I found the pluming of the scopes vertical reticle easy to plum... due to the evenly spaced and balanced thumb screws and the single adjustment ring screws. I almost want to remove all my other scope rings and replace them with these Hunter rings... that is how impress I was with them. And when it comes to my reloading, shooting, scope mounting, and target setups I have an incredible OCD habit... so, yes these are a keeper.
Date published: 2017-12-07
Rated 5 out of 5 by from Perfect for a light weight setup! I bought these knowing Vortex has great products. I needed some light weight rings for a hunting rifle and these fit the bill perfectly. Light weight, durable, and they are low profile so i can see the turrets while behind the rifle.
Date published: 2017-08-05
Rated 1 out of 5 by from Too fragile Put these on my Ruger predator 260 along with a vortex diamondback hp. My zero changed several times and I traced it back to the rings coming loose. Tried loctite but no help. Torqued down one last time before I was giving up and the bolt snapped that attaches it to the rail. Tried the other bolt just for the heck of it and sure enough it snapped while torquing to 30 inch pounds. Only thing I can think of is the cheap bolt was stretching and finally gave up. I suppose I should have expected this from cheap rings. Not bashing vortex. I love my two razor gen 2 scopes.
Date published: 2017-06-15
Rated 5 out of 5 by from Great Value! I used these to mount a Vortex Diamondback a few weeks ago. While not a lot can be said about a scope ring at the entry level, every part was machined nicely, all the screws had a nice feel when being installed, and the end result feels rock solid. The classic look of these really matched the scope as well. My favorite part about them is the fact that they used Torx screws instead of Allen or flat head screws. So much nicer to deal with. Great job Vortex, these do the job nicely!
Date published: 2018-03-21
Rated 5 out of 5 by from good rings!! great rings they have kept my 3-9-40 vortex crossfire 2 zeroed on my 308
Date published: 2017-06-15
Rated 5 out of 5 by from Sturdy Quality Rings I used these rings on my Crossfire II scope that I put on my Browning T-Bolt 17hmr rifle. They are very easy to install and you can count on them holding your scope no matter how much recoil your gun produces. I would just recommend to use the torque specifications that Vortex recommends so that you don't crush your scope.
Date published: 2018-03-29
Rated 4 out of 5 by from A Good Scope Needs Good Rings Setup my son's new Savage 93 .22WMR with these rings, lapped and aligned them, then mounted a Vortex Diamondback Rimfire 2-7x35 and boresighted it... At the range it was 2 clicks up and 3 clicks right, bullseye! I will buy another set, and will recommend them to others.
Date published: 2017-06-15
Rated 5 out of 5 by from Simple! I bought this for a budget build, and they do what they gotta! They hold solid, haven’t had any issues at all! They have been on the rifle for over 4 months now so that’s all you can ask out of 20 dollar rings! Simple, light, solid. Perfect!
Date published: 2018-03-01
  • y_2018, m_8, d_15, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_RING-L, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 9.55ms
  • REVIEWS, PRODUCT

What height rings to mount Sig Sauer Whiskey3 3-9x40 on a Ruger American Predator ? What size lens caps?

Asked by: Jericho
If you have a 1-piece Picatinny rail I would go with a set of our 1" Pro Ring-Low and if you don't have a 1-piece Picatinny rail, I would go with the 1" Pro Rings-Medium. For the Defender Flip Caps you are going to want our E-10 eyepiece and our O-40 objective piece.
Answered by: Graham at Vortex Optics
Date published: 2018-08-03

I have a Weatherby Vanguard 30-06 & Vortex 3.5x10x50 with 2 piece weaver Base. Would the 1" Hunter Rings work for my set up

Asked by: Bill S.
Please give us a call about your setup, we need a bit more information and we will get you taken care of! 800-426-0048 Ext. 5, thanks!
Answered by: Josh at Vortex Optics
Date published: 2018-07-30

Looking to mount the Vortex Crossfire II 2-7x32 Rimfire to a Ruger American .22LR. Which rings and height would you recommend?

Asked by: Justin
I would recommend going with the 1" Hunter Rings-Medium for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-06-29

Which height Hunter series rings are needed for a Diamondback 4x12-40 on a Ruger American Predator 6.5 Creedmoor? 

Asked by: Jason W
I would recommend going with a set of the 1" Hunter Rings-Medium for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-06-27

will these fit a rimfire receiver?

Asked by: skeys
Give us a call at 800-426-0048 ext. 5 to discuss your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-06-22

have savage 110 tactical in 308 putting 6x24 cross fire cf2-31045 which ring size and height for that set up would be best thx's

Asked by: swooper
I would recommend a set of our 30mm Precision Matched rings in the 1.26" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-06-11

Putting a vortex Dimondback HP 4-16x42 on a Ruger Precison Rifle 5.56 What will be the best rings and height to use.

Asked by: Don 63
For your setup, I would recommend our 1" Pro Extended Cantilever Mount to get you to the proper height.
Answered by: Graham at Vortex Optics
Date published: 2018-05-29

Just bought a set from a gun show here in miami , fl. The pair I got say made in China, is that correct or are these knock offs? My thought was made is USA!

Asked by: Yhtt2009
The Hunter Rings are currently manufactured in China to our specs.
Answered by: Graham at Vortex Optics
Date published: 2018-04-30
  • y_2018, m_8, d_14, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_112
  • loc_en_US, sid_RING-L, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 31.52ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 20.24ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;