Banner
Title

Precision Extended Cantilever Mount

Precision Extended Cantilever Mount Click to Enlarge
SKU: CM-530
Alt Views
Thumbnail
Thumbnail
MSRP: $289.99
*Prices in US Dollars
Reviews:
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 4.59ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
free shipping on orders over $60

Select a Model

Precision Extended Cantilever Mount 30mm

Available in several different sizes with options for 20 MOA cant. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 4.03ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Bought a Viper PST Gen II to mount on my Ruger Precision Rifle in .308. Would this cantilever mount work with this set up of scope and rifle?

Asked by: DarJo242
The Precision Extended Cantilever would work very well, but I would not use the 20 MOA version because your rifle already has 20 MOA built in.
Answered by: Mike at Vortex Optics
Date published: 2017-11-13

What are the torque specs for the 35mm mount?

Asked by: MooseLoad
We recommend 45-50 inch pounds on the base screws and 15-18 inch pounds on the ring screws, and no loctite on any of those.
Answered by: Mike at Vortex Optics
Date published: 2017-11-13

Is it necessary to lap the rings using your precision extended mount (cm-535) with the razor hd 5x20x50 (RZR 52005) on a ruger precision rifle in 6.5 creedmoor

Asked by: rca1968
Lapping our Precision Mounts is not recommended as they are good to go out of the box.
Answered by: Jon S.
Date published: 2017-11-06

I want to mount a Razor HD 5-20x Gen 1 on a Tikka T3x TAC A1, but I am unsure whether to go with a 35mm cantilever mount or rings to make sure that I have clearance, but not a huge gap.

Asked by: 93GT
For the Razor HD, you will want our Precision Extended Cantilever Mount to get proper mounting height.
Answered by: Mike at Vortex Optics
Date published: 2017-10-25

What size allen/torx wrench is used for attaching to mount to rail and for the scope rings?

Asked by: Skeeter
A set of 4 T25 Torx screws attached the mount to the rail.
Answered by: Mike at Vortex Optics
Date published: 2017-10-19

What would be the proper mount for a Viper PST Gen 2 5-25x50 on a Tikka T3X TAC A1 rifle?

Asked by: Claymore
You can use a set of our 30 mm Precision Matched Rings in 1.45" height or one of our cantilever mounts. If you want a mount with 20 MOA built in, our 30 mm Precision Extended Cantilever Mount will work for you.
Answered by: Mike at Vortex Optics
Date published: 2017-10-16

Just bought a vortex viper hst 4-16x44 and was wondering what the best pekingese scope base and vortex scope mount for a Remington 700 30-06 ADL?

Asked by: Captain Burmi
I recommend a 1 piece picatinny rail from www.egwguns.com and a set of our 30 mm Precision Matched Rings in 0.87" height.
Answered by: Mike at Vortex Optics
Date published: 2017-10-10

I have a m1a dropped in a sage ebr chassis and I am wondering if I could mount this on the rail at the 12 o'clock on the chassis and still be able to mount a viper pst gen II on the rifle and extended it over the receiver.

Asked by: A10mm
Give us a call at 800-426-0048 ext 5 to discuss this.
Answered by: Mike at Vortex Optics
Date published: 2017-09-18
  • y_2017, m_11, d_16, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_CM-530, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 4.37ms
  • QUESTIONS, PRODUCT
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 18.95ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

#VORTEXNATION