Precision Extended Cantilever Mount 35mm
Precision Extended Cantilever Mount
SKU: CM-535
Reviews:
free shipping on orders over $60
overview
Precision Extended Cantilever Mount 35mm
Available in several different sizes with options for 20 MOA cant. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base.
VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.
specs
reviews
q_and_a
What size allen/torx wrench is used for attaching to mount to rail and for the scope rings?
A set of 4 T25 Torx screws attached the mount to the rail.
Date published: 2017-10-19
What would be the proper mount for a Viper PST Gen 2 5-25x50 on a Tikka T3X TAC A1 rifle?
You can use a set of our 30 mm Precision Matched Rings in 1.45" height or one of our cantilever mounts. If you want a mount with 20 MOA built in, our 30 mm Precision Extended Cantilever Mount will work for you.
Date published: 2017-10-16
Just bought a vortex viper hst 4-16x44 and was wondering what the best pekingese scope base and vortex scope mount for a Remington 700 30-06 ADL?
I recommend a 1 piece picatinny rail from www.egwguns.com and a set of our 30 mm Precision Matched Rings in 0.87" height.
Date published: 2017-10-10
I have a m1a dropped in a sage ebr chassis and I am wondering if I could mount this on the rail at the 12 o'clock on the chassis and still be able to mount a viper pst gen II on the rifle and extended it over the receiver.
Give us a call at 800-426-0048 ext 5 to discuss this.
Date published: 2017-09-18
I purchased the vortex cm-530 mount from you guys but I'm wondering what size are the base clamp screws. It came with the wrench but I'm trying to use the Wheeler Fat wrench for proper torque and it did not come with the correct bit.. thanks in advance
All of the screws on your mount are T25 screws.
Date published: 2017-09-16
looking to use this mount for the crossfire II 6-24x50mm on my BCM AR. Will this mount work? looking for a mount that will fit with the lowest profile
This mount would work great on your AR.
Date published: 2017-09-11
Where is this mount manufactured? Amazon.com shows it as an import.
Our Precision Extended Cantilever Mount is made in the USA.
Date published: 2017-09-06
I want to mount the Viper PST Gen II 5-25x50 on a Savage mod 10 BA Stealth. What say you.
I recommend a set of our Precision Matched 30 mm rings in 0.87" height for your setup.
Date published: 2017-09-06
