Banner
Title

Precision Matched Rings-1 inch

Two per Package

Precision Matched Rings-1 inch Click to Enlarge
SKU: PMR-01-76-W
Alt Views
Thumbnail
Thumbnail
Thumbnail
MSRP: $199.99
*Prices in US Dollars
Reviews:
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 17.56ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
free shipping on orders over $60

Select a Model
GSA Contract #GS-07F-0129W

Precision Matched Rings — Height: 0.76 Inches | 19.3 mm Weaver

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.

  • Weight (Per Ring): 40 Grams - 1.4 oz
  • Rugged, lightweight, anti-snag design
  • Robust, Grade 8 fasteners
  • 100% made in USA guaranteed for life

Note
These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.76 inches (19.3 mm) from the base. Will work with Picatinny and Weaver mounts. Sold two rings per package. Hex wrench included.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Clamp Screws Ring Screws
45–50 in/lbs 15–18 in/lbs

Weight (Per Ring): 40 Grams - 1.4 oz.

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 3.37ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Mike, my apologies for my previous inaccurate question.  I have a Anschutz 1517 D HB with Vortex Crossfire 6-18x44 and plan to install Warne M824/824 Weaver split bases.  Will these rings be high enough? 

Asked by: Eddie
The Precision Matched Rings will not be tall enough for your setup, you will want our Pro Rings in high height.
Answered by: Mike at Vortex Optics
Date published: 2017-10-17

Will these rings on my Anschutz 1517 with vortex 6-18x44. Thanks

Asked by: Eddie
To use these rings you will need a picatinny rail, they will not mount on the dovetail.
Answered by: Mike at Vortex Optics
Date published: 2017-10-16

WIll these rings fit an 11mm dovetail?

Asked by: stan
The Precision Matched Rings are not designed for use on a dovetail, they are designed to be used on a picatinny rail and in some cases a weaver style mount.
Answered by: Mike at Vortex Optics
Date published: 2017-10-12

Which height in Precision Match Rings (1") should I use on a Ruger AR-15 556 MPR and Diamondback HP 4-16x42?

Asked by: Trent
The 1" Precision Matched Rings will not be tall enough to mount a scope on an AR 15. I recommend using a 1 piece cantilever mount to ensure proper height and that you are mounting the scope entirely on the rail of the receiver.
Answered by: Mike at Vortex Optics
Date published: 2017-10-11

Will the height of these ring work with a 44mm objective lense? Going on a Ruger Scout with an XS Sight systems full length picatinny rail. 

Asked by: Aaron
With a full length rail, you will need our 1 inch Pro Rings in high height to clear the rail.
Answered by: Mike at Vortex Optics
Date published: 2017-10-02

I want to install on a remington 700 tactical 5r W/ badger 20moa rail. using on a diamondback tactical 40mm. would this be a good set up? hold zero?

Asked by: blitz
The Precision Matched Rings will work great on your setup. As long as you mount the scope to our torque specs of 15-18 inch pounds with no Loctite you should be good to go.
Answered by: Mike at Vortex Optics
Date published: 2017-09-29

I have a ruger precision 6.5 creedmoor gen 2 i will be using a nikon monarch 6-24x50 1" will these rings work?

Asked by: Tim Jones
These 1" rings will be too short on your rifle, you will want a 1 inch cantilever mount for your setup.
Answered by: Mike at Vortex Optics
Date published: 2017-09-05

Is any sort of locktite recommended during install?

Asked by: Mct100993
We recommend not using Loctite on your scope rings as that will cause a wet torque situation which can lead to over tightening your rings.
Answered by: Mike at Vortex Optics
Date published: 2017-08-30
  • y_2017, m_10, d_22, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_PMR-01-76-W, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 4.27ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 10.79ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

#VORTEXNATION