Precision Matched Rings-34 mm 1.00 Inch
Precision Matched Rings-34 mm
Height: 1.00 Inch | 25.4 mm
Two per Package
SKU: PMR-34-100
Reviews:
Precision Matched Rings-34 mm is rated
out of
5 by
8.
overview
Precision Matched Rings — Height: 1.00 Inch | 25.4 mm
We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.
- Weight (Per Ring): 70 Grams - 2.5 oz
- Rugged, lightweight, anti-snag design
- Robust, Grade 8 fasteners
- 100% made in USA guaranteed for life
These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.00 inches (25.4 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts. Sold two rings per package. Hex wrench included.
VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.
specs
| Recommended Torque Specs | |
| Base Clamp Screws | Ring Screws |
| 45–50 in/lbs | 15–18 in/lbs |
Weight (Per Ring): 70 Grams - 2.5 oz
reviews
Rated 5 out of
5
by
J-Dawg from
Best rings out there
I have had these 34mm rings on my rifle for well over 2 years now holding a burris XTRii. They worked wonders. I had a slight problem 2 years later. I was having a wandering zero. Once zeroed the rifle would shoot great all day, out to 1k and back without a hitch. But the next day my zero would shift. Since I had my gen 1 razor on the way i decided to pull everything off. Due to my error and overtorque with loc tite (wet vs dry torque specs) i caused SEVERAL of the screws to fail. My rifle still shot lights out only being held in by half the screws. The screws failed becasue of me, but my rings were replaced without any questions. Great job with these rings!
Date published: 2017-06-15
Rated 5 out of
5
by
Dave from
Best Matched Rings You Can Buy!
Bought these matched rings for my Razor HD GEN II 4.5-27X56 optic, and ended up being the best pairing and best fit I could have asked for. These Vortex Rings(1.45" Set) paired with my Razor HD and Defender Flip Caps(56mm), ended up making for a better setup than I could have asked for. Another quality Vortex product!
Date published: 2017-06-15
Rated 5 out of
5
by
Zmoney from
Customer service
Bought a pair of scope rings and when I finally got time to install (which was a few months) they were way too tall. Call customer service and like always no questions asked. Just returned the ones I had and they sent me the right ones. Even sent my new ones out before they got mine.
Date published: 2017-07-28
Rated 5 out of
5
by
R. Johnson from
The Best Rings Out There
I bought a set of Vortex Precision Matched Rings-34 mm for my newest optics about six months ago. After my first set of Vortex Precision Matched Rings they are the only rings that I will use on a bolt action rifle. They are strong, light weight, and never move or loosen. You will always maintain your Zero and never have to worry about misalignment and they look good.
Date published: 2018-03-29
Rated 5 out of
5
by
Chuck from
Put a ring on it
I use these rings on my m4 style rifle that I leave mostly in its padded range bag. Once they were installed and torqued properly I haven't had to make any adjustments in over a year and a half. My zero hasn't drifted and the scope itself hasn't budged the least bit. I'm very happy with the quality and finish of these rings and would be perfectly happy buying another set.
Date published: 2017-06-15
Rated 5 out of
5
by
Ryan from
Perfect alignment on my scope from the start
Installed the rings with my Razor HD. Everything was perfectly aligned right away. Never felt the need to lap. Was worried about going two piece, but with the ease and quality of these rings, those worries went away quickly.
Date published: 2018-03-02
Rated 5 out of
5
by
Purple Heart Hunter from
Best scope rings
Best scope rings hands down. They hold my Razor HD perfectly and even when my rifle gets bumped around on the Arizona back country it keeps everything right and my rifle dead on.
Date published: 2018-03-10
Rated 5 out of
5
by
Vulture17 from
A no brainer
Great workmanship and fit. Mounted them on my M1A and appreciate the wide choose of ring heights for a true custom fit.
Date published: 2017-06-15
q_and_a
What height of the Precision Match 34mm rings would you recommend. I have a Savage 10 HCP with an HS Precision stock, Bagdger 20 MOA picatiny rail. Mounting the Razor HD II 3-18x50 with flip caps. Thank you.
I would go with the 1.0" height on your setup.
Date published: 2018-04-18
I have a Savage 110 BA Stealth in 6.5 Creedmor. I installed a 20 MOA base. I am wanting to use your Razer HD GenII 4.5-27x56. What mount would you recommend? If you recommend PMR what height?
I would go with our 34 mm Precision Matched Rings in 1.10" height for your setup.
Date published: 2018-04-13
Looking at my Razor Gen2 4.5-27; going on to a REPR. Half the Objective is 1.275; I only see the 1.26" - Do I need to go to the 1.45" ? Thanks!
Yes, you will want to go with either the 1.45" Precision Matched Rings or our 34 mm Precision Extended Cantilever Mount to get proper scope height.
Date published: 2018-04-09
I am mounting a Razor HD Gen II 4.5-27x56 on my Bergara HMR Rifle with an EGW 20 MOA base. What size rings do you recommend?
The 1.0" height will be tall enough on your setup.
Date published: 2018-04-06
Hi, I have a Tikka T3X CTR (factory 0 MOA picatinny rail). It has a a McMillan a5 stock with adjustable cheek riser and will be topped with a Vortex Razor HD Gen II 4.5-27x56 EBR 2c. What height rings would you recommend?
I recommend the 1.10" height 34 mm Precision Matched Rings for your setup.
Date published: 2018-03-27
What height ring for a Tikka T3X CTR on a Riton RT-S MOD 7 5-25X56IR ?
I would go with the 1.10" height for your setup.
Date published: 2018-03-20
What ring height would I need for a Razor HD Gen 2 4.5-27 on a Christensen Arms BA Tactical with integral 20 MOA base in 6.5 Creedmoor? Thanks.
I would go with our 1.0" height 34 mm Precision Matched Rings.
Date published: 2018-03-05
For a DD Ambush 308 w/flat top and 3-18x50mm Vortex Razor Gen II, what size and model of rings do you recommend. question resubmitted with more info. Thank you.
I recommend using our 34 mm Precision Extended Cantilever to get proper scope height on your rifle.
Date published: 2018-03-02
accessories
Torque Wrench Mounting Kit
Tighten to the specified torque and not a bit more.
MSRP: $89.99
Buy Now: $69.99