Banner
Title

Precision Matched Rings-34 mm

Height: 1.26 Inches | 32.0 mm

Two per Package

Precision Matched Rings-34 mm Click to Enlarge
SKU: PMR-34-126
Alt Views
Thumbnail
Thumbnail
Thumbnail
MSRP: $219.99
*Prices in US Dollars
Reviews:
Precision Matched Rings-34 mm is rated 5.0 out of 5 by 1.
  • y_2017, m_9, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_PMR-34-126, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 8.55ms
  • REVIEWS, PRODUCT
free shipping on orders over $60

Select a Model

Precision Matched Rings — Height: 1.26 Inches | 32.0 mm

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.

  • Weight (Per Ring): 70 Grams - 2.5 oz.
  • Rugged, lightweight, anti-snag design
  • Robust, Grade 8 fasteners
  • 100% made in USA guaranteed for life

Note
These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.26 inches (32.0 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts. Sold two rings per package. Hex wrench included.



VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Clamp Screws Ring Screws
45–50 in/lbs 15–18 in/lbs

Weight (Per Ring): 70 Grams - 2.5 oz.

Rated 5 out of 5 by from Customer service Bought a pair of scope rings and when I finally got time to install (which was a few months) they were way too tall. Call customer service and like always no questions asked. Just returned the ones I had and they sent me the right ones. Even sent my new ones out before they got mine.
Date published: 2017-07-28
  • y_2017, m_9, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_PMR-34-126, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 3.47ms
  • REVIEWS, PRODUCT

A calculator for ring height would be nice for unsure customers like me.  I'm mounting a Razor gen II 4.5-27x56 with a 20 moa rail on a Bergara 6.5 CM, so what ring height do I need?  

Asked by: Big E
The 1.0" height would work for your setup.
Answered by: Mike at Vortex Optics
Date published: 2017-09-20

Hey guys. Purchased a razor gen 2 4.5-27x56 for my xbolt atac 223. Local supply recommended PMR 1.26.  I got them installed and feel that I could have used shorter rings. Any thoughts?  Also I'm looking to to mount this on my sako A7 270wsm. 

Asked by: Mitchimuus
 I have  a 1.00 on my razor (same as yours), I could have gone lower .91 but have > 1/8 inch and shade extension fits well. The scope is mounted on Savage 12 LRP 6.5 creed moor with 20 MOA EGW rail. Love the scope on any Gun. With this one it's a tac driver. Thats good because I'm a beginner. You can always return the mounts if to low. Good Shooting
Answered by: Pops
Date published: 2017-09-09

I recently purchased a barrett m107a1 and a razor gen2 what height should i get

Asked by: devyn255
You could use our 34 mm Precision Matched Rings in 1.45" height or our Precision Extended Cantilever Mount to get proper height on your setup.
Answered by: Mike at Vortex Optics
Date published: 2017-09-08

Thanks Mike. Do you guys offer and uni mount base rings combos that are quick detach so I can swap my pst and razor between my Sako a7 and xbolt 223

Asked by: Mitchimuus
We have one quick detach cantilever mount but that would be very high for your setups. American Defense Manufacturing makes a lower 1 piece quick detach mount that would work better for your setups, it is the AD Recon SL and it would keep the scope lower to allow for a better cheek weld.
Answered by: Mike at Vortex Optics
Date published: 2017-09-08

ring size for Vortex Razor HD gen II 3x18x50 for a Tikka T3?   Thanks, 

Asked by: Willie
A set of the 1.0" height Precision Matched Rings should work well for your setup.
Answered by: Mike at Vortex Optics
Date published: 2017-09-05

What height rings should I get to mount a Bushnell hdmr 2 on a Ruger precision rifle in 6.5 creedmore

Asked by: Woody
I recommend the 1.45" height for the Ruger Precision Rifle.
Answered by: Mike at Vortex Optics
Date published: 2017-08-25

What size rings do you recommend for Razor HDii to be mounted on Tikka T3X Tac A1?  Scope will be mounted to integrated pic rail...

Asked by: Barney Rubble
The 34 mm 1.45" height Precision Matched Rings will be the best choice for your setup.
Answered by: Mike at Vortex Optics
Date published: 2017-08-22

I am buying a Vortex Razor HD Gen II 3-18x50 for my Sako TRG 22 in 6.5 Creedmoor. Which height is most suitable in the Precision Matched 34 mm Rings?

Asked by: Patrick
With a 1 piece picatinny rail, you can use the 0.92" Precision Matched 34 mm rings.
Answered by: Mike at Vortex Optics
Date published: 2017-08-21
  • y_2017, m_9, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_PMR-34-126, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.08ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 14.73ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

#VORTEXNATION