Banner
Title

Pro Extended Cantilever Mount

1 inch

Pro Extended Cantilever Mount Click to Enlarge
SKU: CVP-1
Alt Views
Thumbnail
Thumbnail
MSRP: $139.99
*Prices in US Dollars
Reviews:
Pro Extended Cantilever Mount is rated 5.0 out of 5 by 10.
  • y_2018, m_4, d_24, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_CVP-1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 6.09ms
  • REVIEWS, PRODUCT

Select a Model

Pro extended cantilever mounts

Vortex Pro 1 inch cantilever ring mount provides the correct height and forward placement for proper scope mounting. The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base.

Note
Made with pride in the U.S.A.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Cap Screws
15-18 in/lbs
Base Screws
25-35 in/lbs
Rated 5 out of 5 by from Awesome Cantilever Mount This Viper extended mount is exactly what you need for mounting your optic to an AR platform rifle or a rifle like the RPR. I have used a bunch of these mounts now and I am happy with all of them. They all appear to be well made and feel very sturdy. I have noticed no shift in the scope/mount or in zero on any of the rifles I'm using these on. The mounting height is spot on for proper eye alignment on my guns I've used them on. They simply work well and get the job done. Not to mention they're made in the US and they're under 0! It's a great mount to put that great glass in. If I need more of this style of mount I will buy more again for sure.
Date published: 2017-06-15
Rated 5 out of 5 by from Would use again I mounted my Vortex Strike Eagle into this mount and have had zero complaints. The optic was easy to mount, especially since the screws are vertical instead of horizontal, making installation much easier. The mount, when torqued to spec, has given me pretty darn good return to zero with my optic, and has never shifted my zero through thousands of rounds of shooting. My only complaint is that this mount is relatively heavy compared to other options on the market, but the fit and finish and overall quality are nothing short of what you would expect of Vortex and I would use this mount again and again.
Date published: 2017-06-15
Rated 5 out of 5 by from Great Mount I mounted this to an AR Style rifle set up for coyote hunting. Paired with a Vortex Diamondback Tactical 4-12X 40 this thing is awesome. Rock solid, I'll never worry about my zero shifting.
Date published: 2017-11-28
Rated 5 out of 5 by from Another Great Vortex Product I purchased this cantilever mount for a AR platform in 7.62x51. I needed something that would give me the correct position on the rifle and allow adequate eye relief. I had bought a Vortex Diamondback HP scope a year ago for future guns. I decided to use the Viper Cantilever mount based on the excellent customer service response on the website questions and answer section. The price was a bargain, shipping has always been perfect, and the VIP warranty is second to no other brand. When i opened the package I was amazed by the quality of the mount. This is a solid product. The mounting was simple and with my Wheeler Engineering scope mounting kit it all went together easily. I torqued the mounting screws to the specifications given and the scope held true. Very impressed with the scope as well. Clarity is exceptional. The eye relief is outstanding. I have many Vortex products on my guns such as a Sparc 2, magnifiers, scopes, and rings. Vortex keep doing what you have been doing and you will be the leader of the optics world.
Date published: 2017-06-15
Rated 5 out of 5 by from AR Scope mount I was looking for a strong mount for my Strike Eagle but the mounts nuts had to be on the right side. I built a side charging AR and most scope mounts have the mounting nuts on the left side which I kept hitting with my hand, it's a little on the rough side for the knuckles! I contacted Vortex and they recommended this mount, PERFECT !!! I have not had to re sight my rifle since I put this combo on.
Date published: 2017-06-15
Rated 5 out of 5 by from SOLID. I bought this along side a 1-6x Strike Eagle about a month and a half ago or so. This mount is very solid! When I pulled it from the packaging I was impressed with the machining and finish as well as the sturdy feel! I would definitely buy again!
Date published: 2018-03-01
Rated 5 out of 5 by from Exactly what I needed I built this 6.8 SBR for hog hunting here in Georgia. I called Ryan and told him my plan and asked his recommendation. This mount and a 1-4x Crossfire II is a nice setup. I did want an illuminated reticle for lower light conditions. Prices are right on each item. I have a couple of Vortex Viper PST's on Service Rifles but wanted a lower profile so covered (low) knobs made this an easy decision.
Date published: 2017-06-15
Rated 5 out of 5 by from Great AR Mount! I use this mount on my 3 gun rifle and so far it has been an awesome product! It is machined extremely well and does exactly what I need it to do. This mount has taken tons of abuse getting thrown into drop barrels, getting banged up in and out of the truck. My scope has never budged! It's a great product and I will be buying more in the future.
Date published: 2017-06-15
  • y_2018, m_4, d_24, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_CVP-1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 5.22ms
  • REVIEWS, PRODUCT

Will this mount raise the Vortex Crossfire 2, 4-12x 40 (AO) scope over top of the flip up rear mbus sight on the newer m&p 15-22 rifles. I would like to just leave the sight on instead of taking it on and off. Thank you for your assistance.

Asked by: RBreezy
Yes, it should clear your rear sight when it is folded down.
Answered by: Mike at Vortex Optics
Date published: 2018-04-06

I recently bought a S&W M&P Sport II Optics Ready with the picatinny rail. Will this mount work with a Diamondback HP 4-16 x 42?

Asked by: BRob
This mount will work great for the Diamondback HP on your rifle.
Answered by: Mike at Vortex Optics
Date published: 2018-03-27

I want to run a pst gen ii 3x15x44 on a scar 17. Would this mount clear the back sight. 

Asked by: Mike h
If your sight is shorter than 0.5" when folded down, then it will clear.
Answered by: Mike at Vortex Optics
Date published: 2018-03-21

Would this work for a 50 bmg?

Asked by: swha
Yes, the Pro Extended Cantilever Mount would work on a .50 BMG.
Answered by: Mike at Vortex Optics
Date published: 2018-03-23

How much does it weigh?

Asked by: Alex
The Pro Extended Cantilever weighs 7 oz.
Answered by: Mike at Vortex Optics
Date published: 2018-03-07

I have a Crossfire II 3-9x40 on a AR15 build with unlimited rail space. I shoot with my nose a finger space from the charg handle, stock extended on #2. Would this give me enough eye relief or should I get the Sport Cantilever 1-Inch Mount?

Asked by: Chris
If you are running that close to your charging handle you may want the Sport Cantilever Mount with 3" offset on your setup.
Answered by: Mike at Vortex Optics
Date published: 2018-03-06

Do recommend lapping this mount or any of the other cantilever mounts?

Asked by: Joe p
You should not have to lap this mount before using it.
Answered by: Mike at Vortex Optics
Date published: 2018-02-19

Can I mount the Vortex 4x14-40 Crossfire BDC scope with rear Magpul mbus flip up iron sight on AR15 (Picatinny rail)? If so, how?

Asked by: sarandmon
Yes, you can mount your scope using our Sport Cantilever Mount which would place it at proper height and it would clear the rear flip up sight when it is folded down.
Answered by: Mike at Vortex Optics
Date published: 2018-04-05
  • y_2018, m_4, d_24, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_92
  • loc_en_US, sid_CVP-1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 4.98ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 11.8ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;