Banner
Title

Tactical 30 mm Ring

Extra-High | Absolute Co-Witness
[1.46 Inches | 37.0 mm]

One per Package

Tactical 30 mm Ring Click to Enlarge
SKU: TRXHAC
Alt Views
Thumbnail
MSRP: $24.99
*Prices in US Dollars
Reviews:
Tactical 30 mm Ring is rated 5.0 out of 5 by 1.
  • y_2018, m_12, d_10, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_TRXHAC, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 8.15ms
  • REVIEWS, PRODUCT

Select a Model

Tactical 30mm Red Dot Ring — Absolute Co-Witness [1.46 Inches | 37.0 mm]

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail. When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.
Provides absolute co-witness on an AR15 platforms.


Note
This Vortex Tactical Ring positions the center of the riflescope tube at a height of 1.46 inches (37.0 mm) from the base.
Sold one ring per package.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Clamp Hex Nuts Ring Screws
35–45 in/lbs 15–18 in/lbs
Rated 5 out of 5 by from Great rings The rings keep a nice tight grip on any scope expecially magnum calibers
Date published: 2017-07-28
  • y_2018, m_12, d_10, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_TRXHAC, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 4.58ms
  • REVIEWS, PRODUCT

What size ring should I use to mount strike fire 2 red dot to my db15 5.56 ar with still able to use magpul gen 2 mbus front and rear backup sights 

Asked by: Jcshabaz
You should use the Extra high lower 1/3 or Extra high absolute height depending on what type of co-witness you'd like! Give us a call at 800-426-0048 Ext. 5 if you have further questions.
Answered by: Josh at Vortex Optics
Date published: 2018-11-19

I am trying to not use my cantilever for my strikefire 2 what is the difference between th 1/3 extra high and extra high absolute. I have back up sight front and rear and am trying to achieve cowitness using a ring 

Asked by: Jcshabaz
The difference in height is 3 mm, and one is for an absolute co-witness and the other is for a lower 1/3 co-witness. Please refer to this link regarding what each co-witness looks like - https://www.google.com/search?q=lower+1/3+vs+absolute+co+witness&source=lnms&tbm=isch&sa=X&ved=0ahUKEwioka6R4eDeAhXCrIMKHS1DDHcQ_AUIDigB&biw=1920&bih=949#imgrc=taqMUXhLAPBAQM: Give us a call if you have further questions - 800-426-0048 Ext. 5.
Answered by: Josh at Vortex Optics
Date published: 2018-11-19

I have a Ruger Precision Rifle in .308 and have the Mil Dot Viper 6.5-20 X 44 PA scope. I purchased the Vortex Optics Tactical 30mm Rings, Extra High. Were these rings a good choice for my equipment or is there a better alternative?

Asked by: AzMike
Thanks for reaching out! Yes, a far better option would be our 30mm Precision Matched Rings 1.45" for your setup - http://vortexoptics.com/product/vortex-precision-matched-rings-30mm-riflescope-145 The tactical rings aren't paired but work well for red dots and magnifiers!
Answered by: Josh at Vortex Optics
Date published: 2018-11-19

What scope mount height would you recommend for a strike fire attached to a remington 870?

Asked by: hunter2
Thanks for the question! If you have a 1-piece Picatinny rail, I would recommend going with the Low ring for your 870.
Answered by: Graham at Vortex Optics
Date published: 2018-11-06

Do these rings need to be lapped if used in pairs to mount a scope?

Asked by: Roughneck
Thanks for the question! Yes, these rings are primarily designed to be used with red dots, so if using them for a rifle scope we suggest lapping them. Otherwise, we do offer rings that come in a pair designed for rifle scopes.
Answered by: Graham at Vortex Optics
Date published: 2018-11-05

Will this be ok to replace the cantilever mount on the Strikefire II red/green dot?  

Asked by: Trap
Yes, that'll work. It depends on what height you want to mount it it though.
Answered by: Josh at Vortex Optics
Date published: 2018-10-23

Can i use these with a Viper HS LR 6-24x50 FFP on a Ruger Precision Rifle Gen 3?

Asked by: sam101
Thanks for the question! These rings are primarily meant for red dots and will not get you high enough for your setup. You are going to want to either go with one of our cantilever mounts or a set of our 30 mm Precision Matched Rings 1.45" inch height.
Answered by: Graham at Vortex Optics
Date published: 2018-10-23

I recently purchased a vortex viper hst 4-16x44 to mount on my Tikka T3 lite. What rings are best for this set up? Not sure height for clearance.

Asked by: Redd
Thanks for the question! I would recommend going with a set of or 30 mm Pro Rings-Medium for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-09-12
  • y_2018, m_12, d_10, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_35
  • loc_en_US, sid_TRXHAC, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.58ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 17.66ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;