Switchview Throw Lever

Switchview Throw Lever
SV-5

SKU
SV-5
Switchview Throw Lever is rated 5.0 out of 5 by 31.
  • y_2020, m_7, d_5, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_31
  • loc_en_US, sid_SV-5, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 18.88ms
  • REVIEWS, PRODUCT
Price $79.99
Out of Stock

Overview

Maximize the efficiency of magnification transitions with fluid precision using our throw lever. Constructed of skeletonized, lightweight, tough, hard-coat anodized machined aluminum.

Compatible with all configurations of Razor HD Gen III 1-10x24 FFP riflescopes.

Compatible with all configurations of Viper PST GEN II riflescopes.

Compatible with all configurations of Razor HD AMG riflescopes.

Compatible with select riflescope magnification rings with a diameter of 1.81 inches / 46 mm.

Weight 0.4 oz
Installation Guide (PDF) Download

Reviews

Rated 5 out of 5 by from Great mount!! I bought this mount for my strike Eagle 1-6 scope and I could not be happier with it. The 2-inch offset is perfect for my AR15, it allows you to place the scope where you want it on the rail and still be able to operate the charging handle with ease. The mount is solid and I have put about 500 rounds through my rifle with the mount attached and I have not noticed any change in zero. I would recommend this mount to anybody with a strike eagle, for the price, you can't beat this. The only thing that I would like to have would be a quick detach, but you would be paying a much higher price for that.
Date published: 2017-07-31
Rated 4 out of 5 by from Switch view throw lever Just got mine in the mail, the gap where the Allen screw goes when tightened leaves quite a big gap. So me thinking it needed to be closed I tightened it too much and stripped the screw out and bent the bearing part. Totally my fault, I do wish the metal part that touches the scope magnification was rubber, I think it would give a much better grip against the scope and wouldn't scratch the finish. I think it's a good part, the rubber would make it an excellent part.
Date published: 2019-05-19
Rated 5 out of 5 by from It Just Works!! I used this mount to attach my 1-6 Strike Eagle to my AR. I mounted it right out of the box 18 months ago and it is still holding zero. The extended length allowed me to adjust the eye relief to my personal preference. It does what a scope mount is supposed to do; solid mount that holds zero.
Date published: 2018-03-02
Rated 5 out of 5 by from Excellent mount I paired this mount with my strike eagle 1-6 and it is rock solid. After a year of chasing pigs through the thick SE Alabama brush I have not seen any shift in zero. Definitely a quality product and the price point is hard to beat!
Date published: 2018-03-01
Rated 5 out of 5 by from Great mount to go with scope Connects my AR to my hog hunter scope! Was easy to mount scope, actually stopped in to the store in Middleton and had you guys put my scope on and torque it correctly! Glad Im close enough to stop in and check out the newest stuff!
Date published: 2017-06-15
Rated 5 out of 5 by from Perfect fit on my AR. I used this mount to put my Viper HS-T 44 on my custom 20" flattop AR build. The mount works perfectly and I could not be more impressed. I did notice the separate rail mounting piece was not perfectly flat. I do not know if it was designed to be that way or not. However I torqued everything to proper specs and there are no gaps and the mount is absolutely solid as can be. I wish that Vortex would state what size the screws where. I am still not positive what size it is but a 3mm did the trick.
Date published: 2017-06-15
Rated 5 out of 5 by from Magnification made simple I like to go up and down in Magnification without, leaving the scope. And as a lot of time the rings can be a bit tight so this makes jumping up and down in magnification a lot easier. Simple installation!
Date published: 2019-05-31
Rated 5 out of 5 by from Solid product No machine marks overall pretty beefy but lightweight design easy to install and looks great!
Date published: 2018-03-01
Rated 5 out of 5 by from Works great with my Strike Eagle It's a flawless mount. Combo it with a Strike Eagle and a Switchview Throw Lever.
Date published: 2017-08-02
Rated 5 out of 5 by from Great mount Bought this mount when I got my strike Eagle 1-6 and it’s an amazing mount. Has kept my scope at zero after putting some rounds through my Ar. With the 2in offset it’s mounts perfectly on an AR to give you perfect sight
Date published: 2018-03-19
Rated 5 out of 5 by from Great quality, perfect height. I just bought this mount (3/2/2018). I had two individual scope rings on top of two short risers. It was the only thing that I could get to work with my current scope. I am so happy this setup worked with my 6-24x50mm perfectly on my flat top AR-15. Now all I have to do is get a Vortex scope to replace the one that's on it now!
Date published: 2018-03-03
Rated 5 out of 5 by from Rock Solid 30mm Mount I am not a fan of cantelever mounts (throw lever mount) so a good screw on rail design is where I like to be. I have specific rifles built for purpose so I do not have to swap them around. Vortex also sponsors several major 3-Gun competitions around the country and I cannot thank them enough for that.
Date published: 2017-06-15
Rated 5 out of 5 by from Excellent mount! I was looking for the perfect mount to fit Vortex Strike Eagle 1-6x scopes on an AR and a TAVOR SAR bullpup -- this CM-202 mount turned out ideal for both platforms. For the AR, this mount fits perfect as is. For the TAVOR SAR, I added an extra YHM 1/2in riser for a more comfortable cheek weld.
Date published: 2017-06-15
Rated 5 out of 5 by from A great budget mount If you need a basic scope mount that doesn't have a QD attachment - look no further. It holds great and doesn't come loose - just dial it in to the recommended torque settings. Does everything you need a scope mount to do!
Date published: 2018-03-01
Rated 5 out of 5 by from Rock solid Used this to mount the RazorHD 1-6 to my Tavor. Prefect height, solid build. Fits and looks good. I'd definitely consider buying another. Don't know what else to say, Vortex's quality and reputation speaks for itself.
Date published: 2017-06-15
Rated 5 out of 5 by from This is just what the doctor ordered I have this mount on my .223 platform, and I have zero complaints about it. The finish on it holds up against scratches pretty good. Good solid mount and doesn't shift over recoil or time. Overall great mount!
Date published: 2017-06-15
Rated 5 out of 5 by from Solid I have this set up on a AR holding a Viper HST 4-16. I have only sighted my gun in once! Its held zero perfectly. It looks great on my rifle. I couldn't be happier with the purchase.
Date published: 2018-03-01
Rated 5 out of 5 by from Works Great! Bought this for 3 gun competition and has worked flawlessly, Would recommend this product to anybody using the Vortex Strike Eagle line of products.
Date published: 2017-07-28
Rated 5 out of 5 by from Quick and easy to set up and swap from gun to gun! I have this mounted with a 2-7 Diamondback HP. It takes turns swapping between a few of my guns and is super quick and easy to use. ROCK SOLID
Date published: 2018-03-01
Rated 5 out of 5 by from Tough as nails This mount has been rock solid for me. I have it mounted on my JP 308 and it has stayed true with the zero. It takes the abuse I put it through
Date published: 2017-08-02
Rated 5 out of 5 by from Solid Mount I have other more expensive mounts, but like the solid fit of this mount. Once installed is not going anywhere. Easy to install.
Date published: 2018-11-19
Rated 5 out of 5 by from Best cantilever mount "Superior optics mount"...... Easy installation light weight. Just the right height to allow access to MSR charging handles.
Date published: 2017-07-31
Rated 5 out of 5 by from so far so good I really like this mount on my AR its nice to have one solid piece mount and not break the bank
Date published: 2018-03-29
Rated 5 out of 5 by from Great mount I used this mount to install a 30mm scope on my ar. Solid design would definitely buy again
Date published: 2017-06-15
Rated 5 out of 5 by from Solid Mount... I'm using it to secure my Strike Eagle on my DPMS AR-15. Its looks great and holds 0!
Date published: 2017-06-15
Rated 5 out of 5 by from As sturdy as it gets Does what it's supposed to do. Sturdy solid mount made with good quality
Date published: 2017-06-15
Rated 5 out of 5 by from Strong hold This cantilever mount is perfect, strong, sharp looking, trust worthy.
Date published: 2017-08-04
Rated 5 out of 5 by from Best Scope Mount I bought this for a mount for my Strike Eagle scope to mount to an AR
Date published: 2018-03-01
  • y_2020, m_7, d_5, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_31
  • loc_en_US, sid_SV-5, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 9.42ms
  • REVIEWS, PRODUCT